RC Helicopter Blades: Types, Sizes and How to Buy the Right Ones
RC helicopter blades are the main and tail rotor blades that make lift and control yaw. They’re sized by length in millimetres to match the helicopter’s class (for example about 360 mm for a 450, 600 mm for a 600 and 690–720 mm for a 700), made from plastic, fibreglass or carbon fibre, and shaped for 3D (symmetrical) or sport/scale (semi-symmetrical) flying. Scale helicopters may use three-, four- or five-blade heads. Buying the right blades means matching length, root thickness, bolt hole size and blade type to your helicopter.

Typical blade sizes by class
| Class | Main blade length |
|---|---|
| Micro (e.g. 150–180 size) | About 130–180 mm |
| 250–300 | About 200–250 mm |
| 450 | About 325–360 mm |
| 500–550 | About 425–520 mm |
| 600 | About 600 mm |
| 700 | About 690–720 mm |
| 800 | About 760–800 mm |
Typical ranges; check your helicopter’s recommended size. Classes are explained in RC helicopter sizes explained.
Materials
Plastic blades suit toy and micro helicopters: they’re flexible and survive crashes. Carbon fibre blades are stiff, light and precise, standard on hobby helicopters from 250 size up. Fibreglass sits between. Wooden blades were once common on older and scale models but are rare now.
Blade profiles
- Symmetrical: same lift upright or inverted; for 3D.
- Semi-symmetrical/flat-bottom: more efficient upright; for sport and scale.
- Scale blades: shaped and finished like the real aircraft.
- Multi-blade sets: matched blades for 3–5 blade scale heads.
Buying checklist
- Length matching your helicopter’s class.
- Root thickness that fits the blade grips.
- Bolt hole size matching the blade bolts.
- Profile suited to your flying style.
- Matching tail blades for the tail hub.
- Reputable brands with consistent balance.
Balancing and tracking
Main blades must be balanced to the same weight and centre of gravity, or the helicopter vibrates. Many carbon blades come matched, but checking with a balancer is good practice. Tracking (blades flying in the same plane) is set via pitch links. Out-of-track blades cause vibration and poor flight.
When to replace
Replace blades after any crash where they hit the ground, even if they look fine; internal damage can cause failure at high head speed. Check for cracks, delamination and loose roots.
Toy and coaxial helicopters
Toy coaxial helicopters use A and B blades that spin in opposite directions. Fit them in the right positions. If a bottom rotor stops while the top spins, look for a stripped gear or motor fault rather than the blades. Fixes are in how to fix an RC helicopter.
Single-blade rotors
Single-blade rotors with a counterweight exist in some experimental and full-size designs, but they’re rare in RC. Single-rotor helicopters (one main rotor, two blades) are explained in single blade helicopters.
Scale blades
Scale helicopters can use multi-blade heads with matching blade sets that look like the real aircraft; see rotorscale helicopters.
Tail blades
Tail blades are sized for the tail hub and boom length, for example about 60–70 mm for a 450 and 95–115 mm for a 700. Match them to the helicopter’s specification and replace them along with main blades after a crash.
Storing blades
Keep spare blades flat in their packaging or a blade bag, away from heat and sunlight, so they stay straight and balanced.
FAQ
What size blades does a 450 helicopter use?
Typically about 325–360 mm.
Should I replace blades after a crash?
Yes, if they hit anything.
Symmetrical or semi-symmetrical?
Symmetrical for 3D, semi-symmetrical for sport and scale.
Do blades need balancing?
Yes, for smooth, vibration-free flight.
More on this topic: the complete RC Helicopters guide covers the basics behind this article.





