Savage Bobber RC Plane: Sizes, Specs and Flying the Bush Plane
The Savage Bobber is a bush-plane-style RC model inspired by the Zlin Savage Bobber, a light Cub-like aircraft with big tyres and an open, stripped-down look. RC versions come in several sizes, from a 600 mm foam kit about 98 g, to a 1-metre balsa ARF from Dancing Wings Hobby around 600 g on 3S, to a 1.88 m STOL model for large motors or a 17 cc gas engine. There’s also a 3D-printable 900 mm version. All share slow, relaxed flight and short take-offs on big wheels.

Versions
| Version | Wingspan | Weight | Power |
|---|---|---|---|
| Foam kit (E32) | 600 mm | About 98 g | 1108-size 4000 kV, 1S/2S class |
| 3D-printed (Planeprint) | 900 mm | About 490–550 g | 2S or 3S |
| Balsa ARF (DW Hobby) | 1000 mm | About 600 g | 2208 2600 kV, 20 A ESC, 7 in prop, 3S |
| STOL ARF | 1880 mm | About 3.8 kg | 3520-size 800 kV or 17 cc gas |
From maker and dealer listings, checked October 2026.
Why it’s popular
The Bobber’s look is pure character: open framework, fat tyres, a big high wing. It flies slowly and lands short, so it suits small fields and relaxed flying. The balsa versions have visible structure that rewards builders, and the foam kit is a cheap, quick project. Kit basics are in RC model airplane kits.
Building notes
- Check that wing and tail are straight and square.
- Strengthen gear mounts; big tyres pass loads to the fuselage.
- Keep the tail light to avoid needing nose weight.
- Balance at the manual’s CG with your battery.
- Set modest throws for the first flights.
Flying
- Fly in calm conditions; light, slow planes drift in wind.
- Use rudder for ground steering; taildraggers need practice.
- Take off with smooth throttle and a little up elevator.
- Land slowly with a touch of power.
- Use flaps (on versions with them) for very short landings.
Who it suits
The Bobber is not a first-time trainer, but a pilot who can fly a basic high-wing plane will find it relaxed and fun. Builders who enjoy traditional construction can also look at vintage balsa wood kits.
Taildragger technique
Like most bush planes, the Bobber has a tail wheel. On take-off, the propeller’s torque and airflow pull the nose to one side, so hold rudder to keep straight and let the tail lift as speed builds. On landing, touch down slowly, keep the stick back to hold the tail down and steer with rudder until it stops. Big tyres help on grass but can bounce on hard surfaces, so land gently.
The real Savage Bobber
The full-size Zlin Savage is a light aircraft family based on the classic Piper Cub layout; the Bobber variant has a stripped-back, custom look with exposed tubing. The RC models capture that style rather than every detail.
Common upgrades
Owners often add LED lights for evening flying, change to softer or larger tyres for rough grass, fit metal-gear servos for flaps and elevator, and use a slightly larger battery for longer flights if the CG allows it.
Foam or balsa version?
The 600 mm foam kit is cheap, quick to assemble and light enough to bounce off rough landings, but it is easily pushed around by wind. The 1-metre balsa ARF looks more like the real aircraft, flies more steadily and takes upgrades better, at the cost of more careful repairs after a crash.
FAQ
What sizes does the Savage Bobber come in?
From 600 mm foam to 1 m balsa and 1.88 m STOL versions.
What battery does the 1 m version use?
3S in the DW Hobby version.
Is it good for beginners?
Better for pilots who can already fly a trainer.
Can it land on grass?
Yes; big tyres help.
More on this topic: the complete RC Airplanes guide covers the basics behind this article.





